Pull switch 2-way THPG Duroplast
Pull switch made of Duroplast. Shown here in the version as a 2-way switch. A 2-way switch can be used either individually as an on/off switch or in conjunction with a second 2-way switch to switch a light.
Duroplast pull switch.
- 10 A, 10 AX, AC 250V
- Rated power of the SBL circuit up to 10A = max. 100W
- Central insert and pull switch insert made of Duroplast
- Suitable for wall and ceiling mounting.
- Ø 7.0 cm
The classic remote control. Works without batteries and infrared signals.
Today, pull switches are most often used to keep electrical connections away from splash water. For this reason, they are usually installed at ceiling level. However, they are also useful in places where today's extensive wiring infrastructure is not available, i.e. in basements, workshops, garages, sheds and summerhouses. With pull switches a power connection (for light or fan) emerging near the ceiling can be switched in the simplest possible way, without having to run a longer cable to a normal switch within reach of the user. This saves material and labour. Some people are also familiar with pull switches from the classic arrangement above the headboard of a bed. In addition to the previously widespread economy of electrical installations, there was another reason for this. In dark rooms, a hanging cord is easier to find due to its length, which is why this solution can still be found in hospital patient rooms today. The pull loop can be extended as required with chain, cord or even just a string.
All switches, push-buttons and sockets are supplied without outer coverings!
Both round and square single and system coverings are available, as well as square multiple coverings. These can be combined with all switches, push-buttons and sockets from the switch system Duroplast.
All coverings can be used in existing installations without any problems, as they have been developed according to the standard spacings. The Duroplast switch system fits in all standard flush-mounted boxes; only for the installation of data sockets, flush-mounted boxes with an increased volume are recommended.
The Duroplast switch system is compatible with the Bakelite switch system and with the coverings of the white glass switch system. Since the Porcelain switch systems are of a different height, they are not compatible.
- solid, heavy quality with lavish use of materials
- sophisticated, proven materials (Bakelite®, porcelain, thermoset)
- ceramic switch systems of highest reliability
- a discreet design that is hard to resist
- full conformity with DIN and VDE regulations
Thomas Hoof Produktgesellschaft mbH & Co. KG
Bahnhofstraße 3
59348 Lüdinghausen
Germany
E-Mail: info@thpg.de
